|
DENMAC INDUSTRIES, INC.
PLASTIC COATING APPLICATORS
VINYL POWDER COATING
When you want
top-quality vinyl powder coating, the smart choice is Denmac – the
industry’s premier powder coating company in terms of powder coating expertise,
dependable service and affordable prices.
With almost
40 years of vinyl powder coating experience and always staying at the
forefront of technological advances in precision powder coating, Denmac
provides high quality powder coating results with very quick turn times .
The Denmac vinyl powder
coating process adheres to exacting procedures.
All parts are thoroughly cleaned using a variety of cleaning methods in
order to achieve maximum adhesion of the vinyl powder
coating. The parts are then vinyl primered to further enhance the vinyl
fusing process. The vinyl powder, which is a dry, free-flowing, specially
formulated resin, is then applied. When the vinyl powder
coating is fused with the application of heat, it forms a smooth, glossy,
resilient plastic coating. The Denmac vinyl powder coating has outstanding
impact resistance, outdoor durability, color
uniformity, toughness, and excellent adhesion.
Chemical Resistance
The vinyl powder coating produces a uniform finish, with a practical range
of thicknesses from 7 to 20 mils, that can be applied in a
single application. The vinyl powder coating is free from sag,
tears or runs.
Vinyl powder
coating offers excellent chemical resistance to acids,
alkali, aqueous salt solutions, alcohols, gasoline and aliphatic
hydrocarbons. Concentration, temperature, and the nature of the chemical
does have a bearing on the degree of the coatings inertness.
Vinyl powder
coating is not
recommended for contact with aromatic hydrocarbons, chlorinated solvents or ketones; nor is vinyl powder coating recommended for continuous use above
180 degrees Fahrenheit (preferably below 160 degrees Fahrenheit). Some
intermittent use at temperatures as high as 325 degrees Fahrenheit may be
tolerated in certain applications.
Powder
coated vinyl films exhibit dielectric properties from 600 volts to more than
1,000 volts per mil.
Parts
properly cleaned, primered and coated with vinyl powder coating have excellent salt spray
resistance. The durable finish shows little or no effect in
5,000 hours of salt spray exposure; less than 1/16" undercutting will be
observed on a scored panel exposed for 2,000 hours.
Vinyl Powder Coating Applications
Denmac Industries' precision powder coating greatly enhances the
value of products. It resists corrosion, provides a harder yet
flexible finish, is scratch- and ding-resistant, conceals minor surface
flaws and adds color consistency and a durable, high gloss.
Listed here are
just a few of the many items that can become much more valuable when you use Denmac as your vinyl powder coating company:
|
• Cable trays |
• Bus bars |
|
| • Conduit |
• Fence posts |
• Shelving |
| • Fan guards |
• Lawn furniture |
• Display racks |
| • Dishwasher baskets |
• Air conditioner grills |
• Chain link fencing |
|
